Normally, making the bed is "easy peasy, lemon squeezy". At least for me it is. This does NOT hold true for making a bed in the overhead cab in a RV camper. Both Sandy have had the wonderful (?) chance to experience this and wanted to share our process with you.
Sandy demonstrates: Step one, roll over on one side while trying to smooth out and then tuck in the bottom in the one side, top and bottom of the foam pad.
Lie down and check to see if sheet is correct height from the ceiling. Take into consideration the slope of the front part of the roof.
Sit up and work on the top sheet, blanket and opened sleeping bag one layer at a time. Remember when you crawl from one side to the other not to mess up the bottom layers. This is the tricky part.
When you are finished exasperated, call it good and exit the bunk via the ladder. Remember not to grab any portion of the covers on your way down. Both Sandy and I hope this short demonstration will help any of you who may need this knowledge for a future date.
No comments:
Post a Comment